2No engineers on site for up to four hours Tanker to empty to to 2000g Tanker to stay on site for up to four hours Hire of tank entry equipment High pressure jetter for up to two hours on site Various pipework fittings 5No panel lights

1no eng, 2 hours pipe fittings and valves

2No engineers on site for up to an hour 2No replacement media bale tube 2No End caps for tube 2No jubilee clips to suit tube

Meeting ET on site at approx 10-10.30am - PO 7626 1No engineers on site for up to two hours 1No Replacement brass swing check valve 1No Replacement ksb pump De-sludge for up to 1000g Extra high pressure jetter on site for up to an hour

2no engineers on site for up to four hours Tanker to remove up to 4000g Extra high pressure jetter on site for up to an hour 1no lithium grease 1no bearing and housing kit

2No engineers on site for up to three hours Tank entry equipment Tanker to remove up to 1000g Extra high pressure jetter for up to an hour Dn80 swing check valve

1No engineer on site for up to five hours 1No cctv quipment with cat scan with operative 1No extra high presure jetter with operative 1No panosonic motor and gearbox 1No top pulley 1No drive belt 1No wiska box Ducting Pump conversion kit including pump 1No orange float 1No warning beacon

Meeting ET at 9am Purchase order: 180326 1No New TT Pump - DGO 200/2/80 A1CM5 1.7KW Pump coupling to suit Top brackets 4No Lengths of guiderail - 43mm od Lifting chain and D Links to suit Tanker to remove up to 1000 gallons Up to 1 hour of high pressure jetting Hire of tank entry equipment 2No Waste water Engineers on site for up to 4hours

Oliju SGR 40.150 400v Manual 1½ 2 eng 4 hrs Further to our Engineers recent site visit they found that one of the pumps has failed and requires replacement. Please see the quotation below for these works.

Site address: Cromford Wharf Quotation (2 )- For MPC Engineers to install a new control panel to a new location and wire in new floats. Before these works are able to take place a new kiosk, concrete pad, 4 inch ducting from the new kiosk into the tank and a power supply in the new kiosk are required. Parts required - 1No New Twin pump 3 phase control panel 4No New Orange floats1No New Red beacon1No Beacon cage to suit Up to 3m of new cable to take power from the power supply in the kiosk to the panel 2No Waste water Engineers on site for up to 4 hours

Site address: Cromford Wharf Quotation (1) to replace the pipework within the pump station. Parts as below - 4No 3m Lengths of pipe 3No Flange plate kits including nuts, bolts and washers 1No T Piece 4No 90 Bends 2No Brass non return valves 4No Plain to threaded barrel nipples 4No BSP 4No Socket unions 2No Straight connectors Tanker to remove 2000 gals

Remedial Parts Moniton Junction Box (240x190x90) KSB Amarex ARX F080-180/017F4YSG -170 c/w 10m power cable Old claw to be fitted to new pump. Stonegravels

Customer purchased own pumps, we just need to install - may need to sump pump

Terry - 07967417902 - Will meet you on site TANKER BOOKED FOR 9AM BA/BB whole bearing BA/BB full back bearing (two half’s) Top and bottom pulley New belt - 1120 Tank and jetter - Eurotech Purchase Order: 007223 New pump - doc 7 with float New motor - Panasonic 1 Eng 5 hrs

RETURN TRIP WITH BIGGER OVERLOADS - 2X Omron, J7TKN Thermal Overload Relay, 8 to 11 A F.L.C, 11 A Contact Rating, 15 kW 3P 1X Arriving on 19 February 2026 1X Arriving on 18 March 2026

RETURN TRIP WITH BIGGER OVERLOADS - 2X Omron, J7TKN Thermal Overload Relay, 8 to 11 A F.L.C, 11 A Contact Rating, 15 kW 3P 1X Arriving on 19 February 2026 1X Arriving on 18 March 2026

Order Number: 793 4 10 m orange floats 50mm x 50mm piece of angle 4 m8 through bolts Tank and Jetter with water as no water supply 5mm zip ties 1000 G tanker and jetter - Jetter will need to take water - Eurotech Purchase Order: 007139 1 Eng 2 hrs

Thank you for your recent enquiry regarding a support for your off mains drainage system, please see below for our quotation and what this includes. Everything you need to get a selection of quotes from tradespeople and suppliers for your project to deliver a compliant system, including: • Site survey (one number) • Plan view schematic of proposed solution indicating pipework, cabling, equipment locations • Local Source Protection Zone (SPZ) map • Specialist equipment options sized and specified accurately (i.e. tank(s), pump station(s), control panel) • Buildings control / regulations requirements • Hydraulic levels schematic • Unit specifications and costs for supply • Full bill of materials including bulk product estimates (concrete, gravel, pipework) and equipment costs • Project coordination assistance for materials delivery • Manufacturer installation guides and instructions • Service Contracts to provide the building control officer Additionally with a Detailed Pack the team will provide x2 one hour zoom, WhatsApp or telephone calls to answer questions and provide assistance for you or your groundworker team.

1no BG10 Motor and Gearbox Chain and link to suit 1no Top Sprocket 1no Bottom sprocket 1no engineer on site for up to 2 hours, travel and mileage

CALL 30 MINS BEFORE - 07577 670411 Pump station 2 Further to our Engineers recent site visit he has advised that the junction box within the pump station requires replacement. Please see the quotation below for these works.

Booked for 1pm ish - please speak to Rob before attending. 1No New panel Loss of pressure airline Push fit connector to suit 1No Waste water Engineer on site for up to 2 hours including the January 2026 service visit

Installing Tricel pumped panel - Should have been installed on post install visit - 1 Eng 1 hr

Go ahead received but still awaiting PO - would like to book for March time** Site address: Ranksborough Hall, Langham, Oakham LE15 7EJ 1No New 3 phase control panel with pump run and warning lights (as per Rob email 29/1, use panel labelled Haythorne) 1No External red beacon to suit 1No New Isolator Up to 2m of new cable 2No New float brackets 4No Control floats 1No Waste water Engineer on site for up to 4 hours

Following our engineer’s recent site visit, please find the quotation below for the replacement of the floats within the pump station, as well as the installation of a new control panel and beacon.

Site address: EKFB Greatworth Green Tunnel Compound, Culworth, Banbury OX17 2HL 8No Bearing greasomatics 1No New Sludge return pump Tanker to remove up to 10000 gallons Up to 2 hours of high pressure jetting 2No Waste water Engineers on site for up to 3 hours